|
Title: Fishs River IPA |
|
|
| Boil Size: 30.3 L |
Boil Time: 90 |
Boil Gravity: 1.089 |
Efficiency: 75 |
Mash Thickness: N/A |
Sugar Scale: Specific Gravity |
| Brew Method: All Grain |
Pitch Rate: N/A |
Primary Temp: N/A |
Priming Method: N/A |
Priming Amount: N/A |
Creation Date: 10/29/2018 11:43 AM |
Notes: Recipe provided by Vinnie Cilurzo
where the hop bill says Columbus it is CTZ according to the pdf from Vinnie.
Ingredients:
for 6.0 gallons (22.7 L) [Net: 5 gallons (18.9 L) after hop loss]
13.25 lb (6.01 kg) Two-Row pale malt
0.6 lb (272 g) Crystal 45 malt
0.6 lb (272 g) Carapils (Dextrin) Malt
0.75 lb (340 g) Dextrose (corn) sugar
3.50 oz (99 g) Columbus* 13.90% A.A. 90 min.
0.75 oz (21 g) Columbus* 13.90% A.A. 45 min.
1.00 oz (28 g) Simcoe 12.30% A.A. 30 min.
1.00 oz (28 g) Centennial 8.00% A.A. 0 min.
2.50 oz (71 g) Simcoe 12.30% A.A. 0 min.
1.00 oz (28 g) Columbus* 13.90% A.A. Dry Hop (12 to 14 days total)
1.00 oz (28 g) Centennial 9.10% A.A. Dry Hop (12 to 14 days total)
1.00 oz (28 g) Simcoe 12.30% A.A. Dry Hop (12 to 14 days total)
0.25 oz (7 g) Columbus* 13.90% A.A. Dry Hop (5 days to go in dry hop)
0.25 oz (7 g) Centennial 9.10% A.A. Dry Hop (5 days to go in dry hop)
0.25 oz (7 g) Simcoe 12.30% A.A. Dry Hop (5 days to go in dry hop)
*Tomahawk/Zeus can be substituted for Columbus
White Labs WLP001 California Ale Yeast or
Wyeast 1056 American Ale Yeast
Original Gravity: 1.072
Final Gravity: 1.011
Extract Efficiency: 75 percent
IBUs: 90-95 (actual/not calculated)
ABV: 8.2%
SRM: 7
Directions:
Mash grains at 151-152° F (66-67° C) for an hour or until starch conversion is complete.
Mash out at 170° F (77° C) and sparge. Collect 8 gallons (30 L) of runoff, stir in dextrose,
and bring to a boil. Add hops as indicated in the recipe. After a 90 minute boil, chill wort
URL: https://www.homebrewersassociation.org/attachments/0000/6351/doubleIPA.pdf
to 67° F (19° C) and transfer to fermenter. Pitch two packages of yeast or a yeast starter
and aerate well. Ferment at 67° F (19° C) until fermentation activity subsides, then rack
to secondary. Add first set of dry hops on top of the racked beer and age 7-9 days, then
add the second set. Age five more days then bottle or keg the beer.
Extract Substitution:
Substitute 6.5 lb (3.0 kg) of light dry malt extract for two-row malt. Due to the large
hop bill for this recipe, a full wort boil is recommended. Steep grains in 1 gallon (3.8 L)
of water at 165° F (74° C) for 30 minutes, then remove and rinse grains with hot water.
Stir in dextrose and top up kettle to 8 gallons (30 L), and bring to a boil. Add hops as
indicated in the recipe. After a 90 minute boil, chill wort to 67° F (19° C) and transfer to
fermenter. Pitch two packages of yeast or a yeast starter and aerate well. Ferment at 67°
F (19° C) until fermentation activity subsides, then rack to secondary. Add first set of dry
hops on top of the racked beer and age 7-9 days then add the second set. Age five more
days then bottle or keg the beer |
|
