Making an Oatmeal Stout? You're going to need Flaked Oats or you're just making a stout...not that there's anything wrong with that.
General Info
- Pre-Gelatinized
- For use with Oatmeal Stouts </ul
Sorry, but we don't currently carry anything matching this ingredient.
Making an Oatmeal Stout? You're going to need Flaked Oats or you're just making a stout...not that there's anything wrong with that.
General Info
Gambrinus Honey Malt is aptly named. With it's honey like taste and residual sweetness this 2-row barley malt is without compare.
General Info
Styles
Pilsen Light DME (dry malt extract) is 100% pure malted barley extract made from 100% malt and water. It can be used in the production of all extract beer styles, and to adjust the color, flavor and gravity of all-grain beers.
General Info
Styles
Magnum is a bittering/aroma type cultivar, bred in 1980 at Huell, the German Hop Research Instititute, from the American variety Galena and the German male 75/5/3. (alpha acid: 10.0-12.6% / beta acid: 5.0-7.0%)
With this mineral you are able to increase the hardness of the water you are adding to. Gypsum will also lower the mash PH making this very useful for brewers that use distilled water.
We recomend 1 teaspoon per 5 gal.
A balanced blend of minerals, proteins, amino acids and vitamins to improve yeast activity during fermentation.
Improves attenuation and speed of fermentation.
Whirlfloc® T kettle coagulant and fining agent is a purified, high molecular weight carrageenan powder extracted from Irish Moss algae, put in a convenient tablet form. It reacts with colloidal, haze promoting material in the wort to accelerate the formation of dense and compact trub during the hot and cold wort breaks. Whirlfloc binds with the trub and is removed with that material by settling or filtration before the beer is finished. It does not remain in the beer. This saves time, boosts wort recovery, and results in a brighter wort. Improved wort clarity with Whirlfloc T leads to cleaner fermentation and easier filtration afterward.
| Recommended Usage | For 5 gallons, add 0.2-0.4 tablets to the boiling kettle, 10 minutes before the end of boiling. Occasionally as much as a 1 full tablet is required, especially in low-pH brews.Tablets do not need to be hydrated and should dissolve rapidly. If problems occur, the tablet may be crushed prior to use. |
|---|
This famous yeast strain from Weihenstephan in Germany is used world-wide within the brewing industry. SafLager W-34/70 allows to brew beers with a good balance of floral and fruity aromas and gives clean flavors and high drinkable beers.
FERMENTATION: ideally 12-15°C (53.6-59°F)
PITCHING: 80 to 120 g/hl for fermentation at 12°C – 15°C (53.6-59°F). increase pitching for fermentation lower than 12°C (53°F), up to 200 to 300 g/hl at 9°C (48°F)
