Brewer's Friend

Print

El's New Skool IPA v1.0

164 calories 15 carbs
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 60 min
Batch Size: 25 liters (fermentor volume)
Pre Boil Size: 34 liters
Pre Boil Gravity: 1.037 (recipe based estimate)
Efficiency: 63% (brew house)
Calories: 164 calories (Per 355mL)
Carbs: 15 g (Per 355mL)
Created Tuesday August 25th 2015
1.050
1.010
5.36%
66.92
6.34
n/a
 
Fermentables
Amount Fermentable PPG °L Bill %
3.5 kg American - Pale 2-Row3.5 kg Pale 2-Row 37 1.8 53.8%
2 kg United Kingdom - Maris Otter Pale2 kg Maris Otter Pale 38 3.75 30.8%
0.5 kg American - Carapils (Dextrine Malt)0.5 kg Carapils (Dextrine Malt) 33 1.8 7.7%
0.5 kg American - Caramel / Crystal 20L0.5 kg Caramel / Crystal 20L 35 20 7.7%
6.5 kg Total      
 
Hops
Amount Variety Type AA Use Time IBU Bill %
25 g Citra25 g Citra Hops Pellet 13.3 Boil 50 min 36.06 26.3%
15 g Centennial15 g Centennial Hops Pellet 8.7 Boil 20 min 9.01 15.8%
20 g Cascade (US)20 g Cascade (US) Hops Pellet 7.6 Boil 20 min 10.5 21.1%
15 g Centennial15 g Centennial Hops Pellet 8.7 Boil 10 min 5.4 15.8%
20 g Cascade (NZ)20 g Cascade (NZ) Hops Pellet 7.2 Boil 10 min 5.95 21.1%
 
Mash Guidelines
Amount Description Type Temp Time
2.5 L Single Infusion Infusion 68 °C 90 min
Starting Mash Thickness: 2.5 L/kg
 
Yeast
Danstar - Nottingham Ale Yeast
Amount:
1 Each
Attenuation (custom):
82%
Flocculation:
High
Optimum Temp:
14 - 21 °C
Starter:
No
Fermentation Temp:
18 °C
Pitch Rate:
1.0 (M cells / ml / ° P) 310 B cells required
Yeast Pitch Rate and Starter Calculator
Quick Water Requirements
Water Gallons  Quarts
Recipe is in Metric, but your profile specifies US units. Adjusted volumes to US units    
Total mash water needed 11.94 47.7  
Strike water volume at mash thickness of 1.19803 qt/lb 4.29 17.2  
Remaining sparge water volume 7.64 30.6  
Grain absorption losses -3.58 -14.3  
Mash Lauter Tun dead space -0.25 -1  
Amount going into kettle 8.1 32.4  
Boil off losses -1.5 -6  
Hops absorption losses -0 -0  
Amount going into fermentor 6.6 26.4  
Total: 11.94 47.7
 
Notes

BREW NOTES
First brewed 30/08/2015. Want to try push mash temp up and see whether improves mash efficiency.

MASH NOTES.
Only getting around 60-63% efficiency. Have tried all manner of things to bump up. Looked through old notes and remembered that even with a pre Tun heat up, I still need an extra 2 deg C on top of brewers friend calcs. Last 3 brews all around 64-65 deg C mash temp on purpose.(wanted drier beers then but efficiency suffered) This time have bumped up mash temp extra 2 deg aiming for 67-68 deg C over 90 mins. Extra 2 deg C last thing to test before changing to smaller esky cooler Tun.
Ambient temp 18 deg C (end of winter) 30/08/2015
I have tun insulated with cardboard and wrapped in blanket.
Single Infusion.
Grain temp 13 deg C
2.5 L/1kg grain
Strike (brewers Friend) 21L @ 77deg C.
Actual Strike 79.5 Deg C. Adjust for your equipment.
After 30 mins sitting on 67-68 Deg C. Stirred
After 60 mins sitting on 66 Deg C. Added 2L boiling water. No noticeable temp changed.
After 90 mins finished at
Mash Out
Raised temp to 68-69 deg C stir and mash for 10 more minutes = 4 liters @ boiling (adjust for your equipment)
Took first running's and Re-circ'd added
12 litres @ boiling to reach 77 deg C sacc
Lauter to desired wort volume (if needed)
34 L in brew pot (adjust for your equipment) this is a 25L batch. See above.
Pre Boil OG 10.30

BOIL NOTES
See hop schedule above. Adjust AA for IBU's in your area.
90 min boil
Whirl-flock 10 min to go
Add Immersion chiller 10 min to go
Cool to desired ferm temp
Whirlpool

FERM NOTES
Nottingham yeast (Danstar) re-hydration 1.064 slightly high for 1 packet. I re-hydrated only.
Original Gravity 1.076 way higher but 22L
Final Gravity
ABV %

After BREW Notes
Mash temp rise to 68deg C haven't worked. Hit 1.076 but 22L. This is 63% which is my standard efficiency. I added 2L of fresh water to bring it down to 1.070 may add another 1L to make 1.067. Brewer's Friend calcs at 63% efficiency. Had my usual 34 liter to start boil. Left a bit more in pot so not as much trube went in, but still 6L off. Not sure why the extra boil off today.
The extra 2L of water isn't something I like to do, but ABV would be too high for 1 packet of dry yeast. Extra water will bring with some oxygen to aid yeast. Should it attenuate as per all my other brews 80%+ 1.010 i'll end up with an imperial-ish 7.8% 1.012 finish 7.6% down side is I wanted a hoppy plain-ish IPA lucky the extra IBU's are in it as it will still be a balanced beer with a 1.012+ finish.

FG 1.016 added extra water.ABV 6.69%

Tasting notes

Version 1.0 was
4.2 Kg 2 Row 48.8%
3.4 Kg UK MO 39.5%
.5 Kg Carapils 5.8%
.5 Kg Crystal 20L 5.8%

Version 2.0 was
3.6 Kg 2 Row 47.4%
3 Kg UK MO 39.5%
.5 Kg Carapils 5.8%
.5 Kg Crystal 20L 5.8%

Version 3.0 as above now

Last Updated and Sharing
 
420
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2015-10-21 09:50 UTC