Brew your best beer EVER. Save 5% on Brewer's Friend Premium today. Use code 5OFF. Sign Up ×

Kilty Pleasure

283 calories 28 carbs
Beer Stats
Method: All Grain
Style: Strong Scotch Ale
Boil Time: 90 min
Batch Size: 5.25 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 4.8 gallons
Pre Boil Gravity: 1.063 (recipe based estimate)
Efficiency: 68% (brew house)
Source: Sean G. Tierney
Calories: 283 calories (Per 12oz)
Carbs: 28 g (Per 12oz)
Created Saturday February 27th 2016
1.085
1.020
8.48%
21.65
17.2
n/a
 
Brew Log History

Target 74°F
Ambient: {{ stats.ambient | number:0 }} °F

OG: {{ stats.ogGravity | number:3 }}
Attenuation: {{ stats.attenuation | number:2 }}%

Calories: {{ stats.calories | number:0 }} / 12 oz
Carbs: {{ stats.carbs | number:0 }}g / 12 oz

Readings: {{ readings.length | number }}
 
Fermentables
Amount Fermentable PPG °L Bill %
14 lb American - Pale Ale14 lb Pale Ale 37 3.5 82.1%
1 lb American - Caramel / Crystal 60L1 lb Caramel / Crystal 60L 34 60 5.9%
6 oz American - Caramel / Crystal 80L6 oz Caramel / Crystal 80L 33 80 2.2%
3 oz American - Chocolate3 oz Chocolate 29 350 1.1%
1 lb Brown Sugar1 lb Brown Sugar 45 15 5.9%
0.5 lb Belgian - Biscuit0.5 lb Biscuit 35 23 2.9%
17.06 lb Total      
 
Hops
Amount Variety Type AA Use Time IBU Bill %
1.5 oz Fuggles1.5 oz Fuggles Hops Pellet 4.5 Boil 60 min 21.65 100%
 
Mash Guidelines
Amount Description Type Temp Time
10 gal Fly Sparge 155 °F 60 min
Starting Mash Thickness: 1.3 qt/lb
 
Yeast
Fermentis - Safale - English Ale Yeast S-04
Amount:
1 Each
Attenuation (avg):
75%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
74 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 142 B cells required
Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Notes

Heat water to strike temps 165F
Fill Mash tun, dough in
Start pumps,
maintain 153-155F for 60 minutes
Check for conversion (iodine test)
Extract 1-1.5 gallons of wort
Drain remainder of wort into Boil kettle
volume should be around 6.5-7 gal.
Separately bring both batches to a boil.
reduce smaller batch to a thick consistency, add to full boil
Large batch full boil for 90 ->
@60 - add hops (1.25 oz Fuggles)
@15 - add Irish moss
@15 - immersion chiller
@0 - flame out
Cool -
rack to primary
pitch re-hydrated yeast

--2/16/18 - Added .5# Biscuit, trying to get a more nuttier flavor. I will also need to pitch TWO packets of Yeast.

Last Updated and Sharing
 
10
Views
3
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-02-03 20:42 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top Buy Ingredients
https://pro.brewersfriend.com/